The median home in Burlington was built in 1981; there are 3,525 of them. What the code requires when that roof is replaced, and who signs off, is below.
New Roofing Costs connects homeowners with independent local roofing contractors. We do not perform roofing work.
This number connects homeowners who are planning a new roof or a full roof replacement with independent local roofing contractors. It is not for leak repairs or patch jobs. The call must come from the homeowner who decides on the roof. Calls may be recorded.
The rules for a reroof in Burlington
Permit
A permit from Burlington
Without a permit, Connecticut allows only:
Repairs that are limited to 25 percent of roof covering and building siding within one calendar year.
2022 CSBC, (Amd) R105.2, item 11
A whole new roof is more than that, so it goes to Burlington’s building official.
IRC R908.3.1.1 forbids roofing over two existing layers, over slate or tile, or over a water-soaked roof. With 48% of Burlington’s homes were built before 1980, ask what is under the newest layer.
There is no local exception: the state table says “yes.” Membrane or doubled underlayment, eave to 24 inches inside the wall line (IRC R905.1.2), is a line on every quote here.
Connecticut adds a 4-inch self-adhering strip over all joints of a plywood or OSB deck ((Amd) R905.1.1). It is not needed under a fully adhered membrane, or on board decks under 3 feet wide.
Burlington’s code design values are a 120 mph ultimate design wind speed and a 35 psf ground snow load; it is in Connecticut’s hurricane-prone region. At that wind speed the code calls for asphalt shingles labeled ASTM D7158 Class G or H (Table R905.2.4.1).
Checked against the code text on October 24, 2026. The state’s code edition and the rest of its rules: roof replacement in Connecticut.
Homes and roofs in Burlington
Of 3,305 occupied homes in Burlington, 3,128 (95%) are owner-occupied. Counting by decade, 9% before 1940, 21% before 1960, 48% before 1980 of the housing was in place, and 19% dates from 2000 on. (ACS 2020–2024.)
The housing is 90% detached houses, 4% attached single-family houses (rowhouses, twins and townhouses).
Of the 29 Hartford County municipalities on this site, Burlington has the smallest share of homes built before 1980: 48%, against a county range of 48% to 87%.
Median built: median year the homes were built. Before 1980: share of homes built then. Owners: share of homes that are owner-occupied. Row, twin: share of homes that are rowhouses, twins or townhouses. Census ACS 2020–2024. Hail days: days with hail of 1 inch or larger within 10 miles, 2006–2025, NOAA Storm Prediction Center.
Hail and storms near Burlington
Within 10 miles of Burlington, hail of an inch or more was reported on 13 days between 2006 and 2025, the biggest stones 2 in on June 26, 2009. The most recent was August 26, 2024.
That is more hail days than 87% of the places in the state on this site.
At the county level, Burlington shares Hartford County’s record of 6 storm disaster declarations since 2006, the newest DR-4580 (Tropical Storm Isaias, January 2021). (OpenFEMA.)
Useful life is HUD’s planning figure, not a warranty. More in the guides to shingles, metal, slate and flat roofs.
Material
HUD useful life
Fits a house like
Watch for
Asphalt shingles
20 years
Most pitched roofs; 90% of homes here are detached
Class G or H at 120 mph design wind (IRC Table R905.2.4.1)
Metal (standing seam, panels)
50 years
Simple roofs with long, unbroken slopes
A complete standing-seam system may go over the old roof (R908.3.1)
Slate
75 years
Older houses; 9% here predate 1940
Can’t be roofed over; check the framing for the weight
Flat roof: EPDM or TPO
15 years
Additions and porch roofs
Where the roof meets a wall or parapet
Checking a contractor in Connecticut
Connecticut registers home improvement contractors and their salespeople with the Department of Consumer Protection (C.G.S. § 20-420); 24,065 contractor registrations were active in October 2026. Ask for the number of anyone pricing a roof in Burlington.
Is a permit required for a new roof in Burlington, CT?
A permit from Burlington. A whole new roof is more than that, so it goes to Burlington’s building official.
Do the old shingles have to come off in Burlington?
IRC R908.3.1.1 forbids roofing over two existing layers, over slate or tile, or over a water-soaked roof. With 48% of Burlington’s homes were built before 1980, ask what is under the newest layer.
When were most homes in Burlington built?
By the Census Bureau’s American Community Survey (2020–2024), the median home in Burlington was built in 1981, 48% of homes were built before 1980, 95% are owner-occupied.
Does Burlington get hail that damages roofs?
Hail of 1 inch or larger was reported on 13 days within 10 miles of Burlington from 2006 through 2025 (NOAA Storm Prediction Center). A report means hail fell nearby, not that a roof was damaged.
What license or registration should a roofer in Burlington have?
Connecticut registers home improvement contractors and their salespeople with the Department of Consumer Protection (C.G.S. § 20-420); 24,065 contractor registrations were active in October 2026. Ask for the number of anyone pricing a roof in Burlington.
What they will ask on the phone
The street address in Burlington, or at least the ZIP code
The number of stories, and whether the house stands alone
What is on the roof now (asphalt shingles, metal, slate, tile, or a flat membrane) and roughly how old it is
How many layers are on it, if you know
Your timing for a complete replacement
Whether the house is in a historic district or an HOA